SFSD78 series Wet Materials Hammer Mill
Using for corn straw, brromcorn straw, rice straw, peanut vine,bean stalk, whichis is large moisture contents crops, and also for kinds of the leaf, twig,vegetables.
Working principles & Characteristics
The machine is made of steel plate welded together,The motor is set on the same base with the rotor, direct drive by the pin coupling.
The rotor is dynamic balancing,and can work in reverse,Inlet are on the top of the machine, could cooperate with kinds of the feed devices.The blades are arranged symmetrically, built-in vabrition sieve, internal rotor, wide operating door,flexible screen press unit.
The materials fill from the top inlet through the feed device, going in to the crushing champer from left or right side
by the guide plate,they will be chopped by the high-speed rotating blades,and being discharged from the sieve apertures by the centrifugal force air.
|Model||Rotor diameter (mm)||Hammer piece||Crushing chamber width (mm)||Blade line speed (m/s)||Motor power (kw)||Size (L * W * H)|
Reprint the blog article, if there is infringement, please inform the specific article link