LIMA Machinery
Biomass Briquetting
Biomass Briquetting Machine(High quality machine popular in European market) |
||
| Model | GCBC-I Briquette machine | |
| Output capacity kg/h | 180-210 | |
| Motor Power (kw) | 15kw | |
| Electric heater (kw) | 2.2*2kw | |
| Size of briquettes | Dia.50mm*L.480mm | |
| Size of inside hole | Dia.16mm | |
| Density of briquettes | 1.3 g/cm3 | |
| Weight(kg) | 700kg | |
| Overall dimension(mm) | 2700*600*1600 | |
GCBC-II Biomass Briquetting Machine(High quality machine popular in European market) |
||
| Model | GCBC-II Briquette machine | |
| Output capacity kg/h | 300-350 | |
| Motor Power (kw) | 18.5kw | |
| Electric heater (kw) | 2.2kw×2 | |
| Size of briquettes | Dia.60mm*L.500mm | |
| Size of inside hole | Dia.16mm | |
| Density of briquettes | 1.3 g/cm3 | |
| Weight(kg) | 1000kg | |
| Overall dimension(mm) | 2000*600*1700 | |
GCBC Series Biomass Briquetting Press Machine is an improved model (Do not need to change Inner Former until input capacity exceed 1000 tons) after having continuous modifications. Its design is improved and quality is enhanced on basis of 6 years of research and working experience of traditional briquette machine.
Features of GCBC series briquette press:
Long Life of Screw Shaft
We adopted a durable material (high hardness alloy steel) to make the shaft. We use a different process then what is normally used to make the screw shaft. Our screw shaft is manufactured with a milling machine which guarantees that the distance between every screw is the same, and the angle of every screw is the same.
Long Life of Inner Former
The Inner Former can be used for 1-2 years. The former is made from a whole steel bar through a water jet cutting system so that the inner face is smooth. Therefore, it’ll be easier to form and save energy. This is why the produced briquette is smooth. It consists of two parts, you need to change only the key part when it is worn.
Heating section
we adopted two heat collars which are made from thick copper wires and are ceramic inside.
An attractive feature on the forming hopper is that we added a movable plate on the bottom. It has two functions, one is you can clean it easily. The other is that you can discharge the inputted material when it is jammed.Lubricating System
We have adopted a lubricating system for the gear box. In order to oil the gear box properly, it has an exhaust function to maintain consistent air pressure.Auto Cutting System
It’s a simple piece of equipment composed of two steel plates. (Please see the picture),but briquettes can be automatically cut in uniformed lengths.
Reprint the blog article, if there is infringement, please inform the specific article link
NEXT:Biomass Pelleting